What type of paint to use on concrete statues?

The article aims to answer the question “What type of paint to use on concrete statues?”. It will also discuss how you can paint your concrete statues.

Read on to know more:

What type of paint to use on concrete statues?

Use acrylic paint on concrete statues. It is possible to use acrylic latex paint to stain and soak into concrete statuary. 

Concrete statues should be painted with water-based acrylic latex paints since they penetrate the concrete and leave stains that extend below the surface. Acrylic latex, like oil-based paints, does not dry and break over time like a shell.

How to paint concrete statues?

Follow the instructions below to paint concrete statues:

  • Concrete statues can be painted with acrylic latex paint. Because of their capacity to penetrate the concrete and stain it, water-based acrylic latex paints are recommended for use on concrete statues. 
  • Oil-based paint dries and cracks like a shell, whereas acrylic latex doesn’t. If you’re painting a rabbit, for example, you may use brown and white to make it look lifelike. Instead of spray painting the statue, always use a paintbrush. 
  • Spray paint doesn’t hold up as well as paint applied with a brush, and it doesn’t look as well. Use a dry brush to apply the last coat. Using a chip paintbrush, apply a thin coat of color with a 2″ (5.1 cm) diameter. 
  • Remove as much of the paint off the brush’s bristles as possible by wiping it off with a piece of cardboard. Apply a back-and-forth dusting motion to the details of the statue once the brush is almost dry.
  • Dry-brushing a solid color over a base coat can make fuzzy animal statues stand out more. Brush brown paint over a black base, for example. Dust some white paint over the brown to soften it.
  • Antiquing the statue can give it a worn look if desired. Using a paper towel, remove any excess paint from the surface. It is required to apply and remove paint in order to achieve the desired effect.
  • To give the statue a faded appearance, a small portion of the statue’s base coat should be visible. These concrete leaf stepping stones are a fantastic candidate for antiquing. For 24 hours, allow the topcoat to dry. 
  • Before moving on to the next step in painting concrete, wait 24 hours for the topcoat to cure. If the weather is nice and dry, you can leave it outside.
  • Use the detailing approach to draw attention to specific aspects of a statue. Detailing is the process of hand-painting the topcoat using many colors of paint and utilizing small brushes to add fine details. 
  • This technique can be used to fill in statues’ eyes, noses, and clothing. As an example, you can employ detailing while you’re painting an animal statue that has feathers and beaks or gnomes that are dressed up.
  • To keep the paint from fading, spray the statue with a UV/water repellent. When applying the sealer, place the concrete statue on a well-ventilated surface, such as gravel or rock. 
  • Allow it to air dry for at least 24 hours. Protective sealants extend the life of paint and keep it from flaking. Sealants are available in spray and paint forms. Prevent fading by repelling damaging moisture.

Can I spray paint concrete statues?

Yes, you can spray paint concrete statues. Read on to know how:

  • To achieve a wide range of painted effects on concrete statues, spray paints and stains are a great option. To apply a foundation coat for multilayer treatments, you can utilize aerosol spray cans for solid coloring. 
  • It is possible to apply a clear enamel finish coat to ensure that the paint adheres to clean, unpainted concrete, and to create a glossy sheen. There aren’t many concrete spray paints on the market, but that’s okay. 
  • Apply acrylic latex paint for external use and you won’t go wrong. The paint will penetrate the pores of the concrete and make a strong connection if the surface is clean and bare. 
  • Use additional coats of spray to enhance color or detail once the initial coat has dried. Spray paint can be used to dry-brush over the base coat as well. An aerosol concrete stain is another alternative for staining concrete. 
  • Unlike conventional spray paint, these water-based solutions simulate the completed look of acid-stained concrete with greater transparency. It’s ideal to use this technique on bare concrete, although spray stains can also be used to add color to previously stained surfaces.
  • Spray paint aerosols are ideal for concrete statues due to their lightweight, which allows for precise layering and avoids diluting delicate features. House paint can be diluted with water to produce similar results. 
  • Choose an acrylic latex paint approved for outdoor use in the same way you would for sprays. Apply a foundation layer with a brush after diluting the paint with water to a one-to-one ratio. Before applying the paint, it’s a good idea to moisten the concrete. 
  • A dry-brush finish can be applied after the base coat has cured if desired. Add a topcoat if you want a different finish or if you want to make sure the color on the concrete statue lasts a long time.

After how long can I paint my new statues?

You should wait for at least a month before you paint your new statue. 

There are a few considerations to make in order to get the most from your paintwork. One of these is that it’s advisable to wait at least a month before painting a new concrete statue. When a statue is freshly painted, the paint will not adhere to the statue’s surface. 

Before painting, the statue must also be well cleaned and washed but avoid using soap because it may interfere with the adhesion of the paint. Using a firm brush and clean water is the most effective method for removing any dirt, moss, or algae. Before painting the statue, make sure it is totally dried.

Use a non-yellowing acrylic enamel topcoat sealer to shield the paint from the elements. By avoiding painting the base’s underside, you’re allowing the concrete to breathe and keeping moisture out. Set the statue on a pedestal as soon as it is dry. 

The paint can flake off if it’s left to cure on the ground for an extended period of time. If your statue has already been painted or sealed, make sure to prep the concrete surface according to the spray paint manufacturer’s instructions. 

Concrete that has been painted or has been sealed may not adhere well to some spray paint thus try to sandblast, physically sand, or chemically scrape the seal from the statue before painting. Painting over the concrete statue will be much easier when much of the sealant has been removed.

Conclusion

Painting outdoor concrete statues may offer any yard or front lawn a particular flair and color-coordinate with the rest of the home’s decor. 

It is possible to ensure that outdoor concrete statues are coated with the proper paint so that colors remain brilliant no matter what the weather conditions are.

Frequently asked questions (FAQS): What type of paint to use on concrete statues?

What type of paint to use on concrete statues?

Use acrylic paint on concrete statues. It is possible to use acrylic latex paint to stain and soak into concrete statuary. 

Concrete statues should be painted with water-based acrylic latex paints since they penetrate the concrete and leave stains that extend below the surface. Acrylic latex, like oil-based paints, does not dry and break over time like a shell.

How to paint concrete statues?

Concrete statues can be painted with acrylic latex paint. Because of their capacity to penetrate the concrete and stain it, water-based acrylic latex paints are recommended for use on concrete statues. 

Oil-based paint dries and cracks like a shell, whereas acrylic latex doesn’t. If you’re painting a rabbit, for example, you may use brown and white to make it look lifelike. Instead of spray painting the statue, always use a paintbrush. 

Spray paint doesn’t hold up as well as paint applied with a brush, and it doesn’t look as well. Use a dry brush to apply the last coat. Using a chip paintbrush, apply a thin coat of color with a 2″ (5.1 cm) diameter. 

After how long can I paint my new statues?

You should wait for at least a month before you paint your new statue. 

There are a few considerations to make in order to get the most from your paintwork. One of these is that it’s advisable to wait at least a month before painting a new concrete statue. When a statue is freshly painted, the paint will not adhere to the statue’s surface. 

Bibliography

CHRIS DEZIEL.What Spray Paint Do I Use on an Outdoor Concrete Statue?, BUILDING CONTRACTOR. Retrieved from: https://www.hunker.com/13417014/what-spray-paint-do-i-use-on-an-outdoor-concrete-statue

What was missing from this post which could have made it better?

Leave a Comment