How to set 4×4 posts in concrete?

The article aims to answer the question How to set 4×4 posts in concrete?. It will also mention the tools you need to install the concrete posts. 

The article will also explain what concrete posts are. Read on to need more: 

How to set 4×4 posts in concrete?

  • Using a 4″ wood post, make a hole that is approximately 12 inches wide and three times the diameter of the hole. The hole should be 1/3-1/2 the height of the post above ground while digging it (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
  • Fill up the hole with QUIKRETE All-Purpose Gravel, approximately six inches thick. A post or 2×4 may be used to compress and level the gravel.
  • Set the post in the hole and secure it with 2×4 bracing on both sides.
  • To ensure that the post is absolutely upright, use a level to ensure its placement.
  • Fill the hole up to 3 to 4 inches below the surface with Fast-Setting Concrete.
  • A gallon of water per 50 kg bag of concrete should be poured into the hole and allowed to soak in. In 20 to 40 minutes, the mixture will have hardened.
  • Wait at least four hours before erecting a fence or putting a lot of pressure on a post.

What do I need to set 4×4 posts in concrete?

  • Fast setting concrete
  • Concrete posts
  • Hammer
  • Drill
  • Trowel
  • Shovel
  • Gloves
  • Mask 

How to set a post in concrete?

  • The tube should be inserted into the opening. Temporarily straighten yourself up by inserting the post into the form
  • To begin, fill the tube with the dry mixture. A 4-inch-by-4-inch (or 4-inch diameter) post may be put in a 10-inch diameter hole 2 feet deep using two 50-pound bags of fast-setting concrete.
  • Allow the dry mixture to absorb the water before adding more. Saturate the dry mix with water.
  • Backfill the hole with the earth you pulled out before. It takes anything from 20 to 40 minutes for it to completely dry out. Place heavy things only after four hours have passed.

What do I need to set a post in concrete?

  • Fast setting concrete
  • Concrete posts
  • Hammer
  • Drill
  • Trowel
  • Shovel
  • Gloves
  • Mask 

How to set a concrete post into the ground?

  • Before you start digging, make sure to check your yard for utility lines. For example, many yards include underground utility wires for electrical or plumbing purposes. 
  • You should check with your local utility providers at least two days in advance of excavating your post to determine if there are any wires flowing under the ground.
  • Make your hole three times the width of the post. Measure the length of your pole using a tape measure. 
  • Mark the ground where your post will go once you’ve taken the measurements. Before you start pouring cement, make sure you have enough area to dig a hole three times the diameter of the fence post.
  • Make a hole using a post hole digger. Post hole diggers should be held with the handles together and the jaws open. To clamp the earth, pull the handles apart while pressing the jaws into the ground. 
  • Lift the earth out of the ground by rotating the diggers to make a circle in the ground. The hole should be dug to a depth of 13 the post’s peak height above ground plus 6 inches (15 cm)
  • The bottom of the hole should be filled with gravel to improve drainage. Wood and metal will corrode and rust if they are exposed to water for long periods of time. 
  • Fill the hole to a depth of six inches (15 cm) with gravel to ensure that it will not contain water. A hoe may be used to compact the gravel.
  • A good place to start is with a post. Set the end of the post on top of the gravel in the center of the hole and secure it in place. Make sure your post is plumb by using a two-sided level.
  • Use a wheelbarrow to mix quick-setting concrete. Shop at your local hardware store for a quick-setting concrete. Make a depression in the center of the dry mix in a clean wheelbarrow. 
  • Then, using a hoe, combine 80 lb (36 kg) of concrete with 3 US quarts (2.8 L) of water. Keep mixing the concrete until it is thick like oatmeal and retains its form when squeezed, like a doughnut.
  • It’s time to pour concrete into the hole to a depth of 2 to 3 inches (5.1 to 7.6 centimeters). Transfer the concrete into the hole using a shovel or hoe. To ensure that the hole is entirely filled, make sure that the concrete is poured uniformly around the whole post. 
  • So that you may subsequently cover the cement, leave a gap of at least 2 inches (5.1 cm) between the cement and the ground. Drainage is improved by sloping the concrete away from the post.
  • Using a level, check to see whether your post is level. Use a two-sided post level to ensure that your post is perfectly straight after the concrete has been poured into the hole. If necessary, move and adjust the post until it is level. 
  • If you make any alterations to the post, use the end of your hoe to tamp it down once more.
  • Overnight setting is recommended for the concrete. Don’t place any weight or heavy loads on your post until the following day, despite the fact that fast-setting concrete dries in only 20 minutes. As a result, you can be certain that it will dry perfectly level.

What tools do I need to concrete posts into the ground?

  • Concrete
  • Wheelbarrow
  • Fast setting concrete
  • Concrete posts
  • Hole digger
  • Power auger 

What is a concrete post?

Concrete Slotted fence posts have four internal steel reinforcing bars, making them a long-lasting alternative to timber posts. 

You can rely on the long-term durability of our concrete fencing posts, which are resistant to ground decay. Fence posts with a slotted design can accommodate all of our fencing panels.

Backbone of a robust and appealing garden fencing is the use of concrete fence posts. Concrete posts are the way to go if you want your fence to be more stable in the rainy season. 

If you’re merely seeking to beef up your existing posts, our concrete spurs are a good option. Concrete spurs are short concrete posts that can be bolted to your existing posts for further support. 

To put it another way, if you enjoy the aesthetic of the wooden posts, you may do your part to keep them sturdy.

How to install concrete posts?

  • Rather than using wood supports, concrete slotted posts for fencing or regular trellis panels provide a long-lasting and simple solution to this problem. If necessary, the trellis or panels can be removed and replaced.
  • For added security, you can install panel security brackets to keep the panels from being lifted out.
  • Each post has a weathered (Pyramid) top that is four-sided.
  • Slotted posts and fence panels work well with concrete gravel boards because they keep the bottom of the fence panel off the ground and prevent it from deteriorating prematurely.
  • If the fence will be installed on a slope, you will need to have the posts lengthened to allow the panels to step down it.
  • There are two common methods for anchoring concrete posts: a dry mix (approximately 7 to 1 with no additional water added) or a post mix (about 7 to 1 with no further water added) (follow directions on the bag).
  • The size and depth of the hole will determine how much of each is needed. To ensure a snug fit around the post, aim for a hole diameter of 200 to 250mm (8′′ to 10′′). 
  • The hole should be at least 600 mm (2 feet) deep, regardless of the fence’s height. 
  • We recommend utilizing a longer post and increasing the hole depth to a minimum of 750mm (2′ 6′′) for fences exceeding 1.5m in height.

Conclusion

Pouring concrete posts into the holes you’ve dug for your fence posts helps keep them secure and protected while you continue with the construction of your fence. 

All that is left to do is mix your cement and wait for it to harden. Posts that will endure a long time may be put into the ground in only one day. 

Frequently asked questions (FAQS): How to set 4×4 posts in concrete?

How to set 4×4 posts in concrete?

Using a 4″ wood post, make a hole that is approximately 12 inches wide and three times the diameter of the hole. The hole should be 1/3-1/2 the height of the post above ground while digging it (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Fill up the hole with QUIKRETE All-Purpose Gravel, approximately six inches thick. A post or 2×4 may be used to compress and level the gravel.

Set the post in the hole and secure it with 2×4 bracing on both sides. To ensure that the post is absolutely upright, use a level to ensure its placement. Fill the hole up to 3 to 4 inches below the surface with Fast-Setting Concrete.

A gallon of water per 50 kg bag of concrete should be poured into the hole and allowed to soak in. In 20 to 40 minutes, the mixture will have hardened. Wait at least four hours before erecting a fence or putting a lot of pressure on a post.

How to set a post in concrete?

The tube should be inserted into the opening. Temporarily straighten yourself up by inserting the post into the form

To begin, fill the tube with the dry mixture. A 4-inch-by-4-inch (or 4-inch diameter) post may be put in a 10-inch diameter hole 2 feet deep using two 50-pound bags of fast-setting concrete.

Allow the dry mixture to absorb the water before adding more. Saturate the dry mix with water. Backfill the hole with the earth you pulled out before. It takes anything from 20 to 40 minutes for it to completely dry out. Place heavy things only after four hours have passed.

How to concrete posts into the ground?

Before you start digging, make sure to check your yard for utility lines. For example, many yards include underground utility wires for electrical or plumbing purposes. You should check with your local utility providers at least two days in advance of excavating your post to determine if there are any wires flowing under the ground.

Make your hole three times the width of the post. Measure the length of your pole using a tape measure. 

Mark the ground where your post will go once you’ve taken the measurements. Before you start pouring cement, make sure you have enough area to dig a hole three times the diameter of the fence post.

What is a concrete fence post?

Concrete Slotted fence posts have four internal steel reinforcing bars, making them a long-lasting alternative to timber posts. 

You can rely on the long-term durability of our concrete fencing posts, which are resistant to ground decay. Fence posts with a slotted design can accommodate all of our fencing panels.

Backbone of a robust and appealing garden fencing is the use of concrete fence posts. Concrete posts are the way to go if you want your fence to be more stable in the rainy season. 

Bibliography 

Extending Concrete Fence Posts to Add Trellis. Retrieved from: https://community.screwfix.com/threads/extending-concrete-fence-posts-to-add-trellis.208173/

Leave a Comment