How to put up concrete fence posts?

The article aims to answer the question How to put up concrete fence posts?. It will also mention the tools you need to fix the trellis to fence. 

The article will also explain what concrete posts are. Read on to need more: 

How to put up concrete fence posts?

  • To place your concrete posts, you’ll need to drill appropriate holes. Using a gravel board, measure the distance between each fence post before drawing out the hole. Additionally, the hole should be around two feet deep.
  • Make sure the post is inserted into the hole and that everything is in the correct position.
  • Make sure that your concrete gravel planks fit snugly between the posts. After that, fill each hole with 40 kg of quick-setting concrete mix. 
  • To start the concrete setting, add the necessary water and keep the posts in place. Mixing the dry mix with water before filling the hole is also an option.
  • Before fitting the fence panels into the posts, let the concrete dry for at least one night.
  • Enjoy your new fence as soon as the panels are installed.
  • Make sure you obtain the right quantity of concrete for the task, whether you’re installing concrete fence posts or doing any other concrete DIY project. 
  • Take use of the Total Concrete concrete calculator to receive an exact estimate for your project.

What tools do I need to put up concrete fence posts?

  • Trellis panels 
  • Battens if extending fence posts 
  • U brackets 
  • screws 
  • Drill

How to fix trellis to fence with concrete posts?

  • Battens attached to the fence guarantee that the trellis has space between it and the fence for plants to coil themselves around it. 
  • In general, battens should be between 30mm and 60mm wide and the length of the trellis, depending on the size of your trellis. Inscribe on the fence where the trellis’s top and bottom will be. 
  • When you’re done, put the battens into place with a drill and wood screws. The middle of your trellis might benefit from a separate trellis. Fix the trellis to the battens, and then plant your climbers below.
  • If you can, leave a section of fence post above the fence for attaching trellis when you install the fence panels. You can, however, add wood battens to the posts of an existing fence if you’re extending it. 
  • To raise the fence to the desired trellis height, just attach the robust battens to the existing fence posts. In order to install the trellis panel, screw a U bracket halfway up the fence post or wood batten extension using 35mm screws. 
  • Assemble the trellis panel by securing it to the posts with 35mm screws through the bracket. Preserve the wood by painting or staining the trellis to match the fence.
  • Screwing into concrete posts can break or crack them, therefore avoid doing so. 
  • If your fence has concrete posts, the simplest approach to attach a trellis to the top is to use wooden battens to extend the posts up to the trellis’ height. 
  • These battens should be attached to the fence panels, not the concrete.

How to install trellis to fence with concrete posts?

  • Our preferred method for placing posts in the ground is to use post-mix
  • The quick-setting concrete known as “post mix” is available from most builders’ merchants and is pre-blended and pre-mixed in the manufacturer.
  • Post holes must be dug in a straight line and at appropriate distances from each other. Fence and trellis panels are often positioned between the posts, while slatted panels are typically positioned in front of the posts.
  • It’s a simple method for making sure that the fence posts are put in straight lines using a string line.
  • In general, the posts should be buried at least 600mm (2ft) deep in the earth. A spirit level can be used to make sure that the front of the post is perfectly aligned with a string line after the hole has been drilled. 
  • Using the bag’s instructions, backfill the hole with a post mix. Adjust and support the post for about 10 minutes, until the post mix sets, to ensure a proper fit.
  • Before installing a panel, it’s crucial to make sure that each post’s top is exactly at the same height. A spirit level can be used to check the levels by placing an appropriate piece of straight wood along the tops of the posts.
  • The remaining posts can be installed after the initial ones have been verified to be accurate. Posts and panels can be erected in succession using a quick-setting post mix. 
  • It’s a good idea to use a spirit level and a piece of wood to ensure that every fence post is at the correct height for the panels as you install additional posts.

What is a concrete fence post?

Concrete Slotted fence posts have four internal steel reinforcing bars, making them a long-lasting alternative to timber posts. 

You can rely on the long-term durability of our concrete fencing posts, which are resistant to ground decay. Fence posts with a slotted design can accommodate all of our fencing panels.

Backbone of a robust and appealing garden fencing is the use of concrete fence posts. Concrete posts are the way to go if you want your fence to be more stable in the rainy season. 

If you’re merely seeking to beef up your existing posts, our concrete spurs are a good option. Concrete spurs are short concrete posts that can be bolted to your existing posts for further support. 

To put it another way, if you enjoy the aesthetic of the wooden posts, you may do your part to keep them sturdy.

How to install concrete posts?

  • Rather than using wood supports, concrete slotted posts for fencing or regular trellis panels provide a long-lasting and simple solution to this problem. If necessary, the trellis or panels can be removed and replaced.
  • For added security, you can install panel security brackets to keep the panels from being lifted out.
  • Each post has a weathered (Pyramid) top that is four-sided.
  • Slotted posts and fence panels work well with concrete gravel boards because they keep the bottom of the fence panel off the ground and prevent it from deteriorating prematurely.
  • If the fence will be installed on a slope, you will need to have the posts lengthened to allow the panels to step down it.
  • There are two common methods for anchoring concrete posts: a dry mix (approximately 7 to 1 with no additional water added) or a post mix (about 7 to 1 with no further water added) (follow directions on the bag).
  • The size and depth of the hole will determine how much of each is needed. To ensure a snug fit around the post, aim for a hole diameter of 200 to 250mm (8′′ to 10′′). 
  • The hole should be at least 600 mm (2 feet) deep, regardless of the fence’s height. 
  • We recommend utilizing a longer post and increasing the hole depth to a minimum of 750mm (2′ 6′′) for fences exceeding 1.5m in height.

Conclusion

Climbing plants enjoy trellis panels, which is why they’re an excellent choice for hiding unsightly fences. 

To further enhance seclusion, trellis can be used to add height to fence panels with concrete posts without obstructing natural light.

Frequently asked questions (FAQS): How to put up concrete fence posts?

How to put up concrete fence posts?

To place your concrete posts, you’ll need to drill appropriate holes. Using a gravel board, measure the distance between each fence post before drawing out the hole. Additionally, the hole should be around two feet deep.

Make sure the post is inserted into the hole and that everything is in the correct position. Make sure that your concrete gravel planks fit snugly between the posts. After that, fill each hole with 40 kg of quick-setting concrete mix. 

To start the concrete setting, add the necessary water and keep the posts in place. Mixing the dry mix with water before filling the hole is also an option.

How to fix trellis to fence with concrete posts?

Battens attached to the fence guarantee that the trellis has space between it and the fence for plants to coil themselves around it. 

In general, battens should be between 30mm and 60mm wide and the length of the trellis, depending on the size of your trellis. Inscribe on the fence where the trellis’s top and bottom will be. 

When you’re done, put the battens into place with a drill and wood screws. The middle of your trellis might benefit from a separate trellis. Fix the trellis to the battens, and then plant your climbers below.

What is a concrete fence post?

Concrete Slotted fence posts have four internal steel reinforcing bars, making them a long-lasting alternative to timber posts. 

You can rely on the long-term durability of our concrete fencing posts, which are resistant to ground decay. Fence posts with a slotted design can accommodate all of our fencing panels.

Backbone of a robust and appealing garden fencing is the use of concrete fence posts. Concrete posts are the way to go if you want your fence to be more stable in the rainy season. 

Bibliography 

Extending Concrete Fence Posts to Add Trellis. Retrieved from: https://community.screwfix.com/threads/extending-concrete-fence-posts-to-add-trellis.208173/

Trellis on Top of Fence With Concrete Fence Posts. DIY doctor. Retrieved from: https://www.diydoctor.org.uk/forums/trellis-on-top-of-fence-with-concrete-fence-posts-t41351.html

What was missing from this post which could have made it better?

Leave a Comment