How to install concrete spurs?

The article aims to answer the question “How to install concrete spurs?”. It will also mention how these concrete spurs can be used to repair concrete posts.

Read on to know more;

How to install concrete spurs?

  • Prepare the spur by digging a hole. To begin, clear some room for the new spur. Dig a hole that is half the depth of your chosen repair spur and place it directly next to the fence post in need of support. 
  • To ensure that your concrete repair spur is flush with the wooden post, you may need to chip away part of the old concrete from the area around the wooden fence post. 
  • It’s a good idea to apply a coat or two of wood preservative to your fence and the freshly exposed post while you’re there.
  • Make the necessary changes. In order to determine the height and distance between the drilling sites, you must first insert the spur into the new hole to ensure that it fits properly. 
  • Because the screws are what will hold the spur in place, it is critical that you get them as exact as possible.
  • We suggest using some wooden supports to keep the fence post in place while you mark out the holes for the repair spur.
  • Drill once, measure twice. Drilling may begin as soon as you’ve double- and triple-checked your measurements. For the coach screws, drill a pilot hole first. To guarantee optimal stability, they will pass through the spur and into the fence post.
  • Protect your spur. Once you’ve made sure that all of your screws are secure, the fun begins! With concrete, we’ll secure the spur and the post. When it comes to choosing an aggregate for your fence, you’re at the perfect spot. 
  • Forget tedious mixing ratios and mind-numbing calculations; our post mix is pre-mixed for your convenience. Under typical soil conditions, you only need one bag of post mix for each fence post. Having a few extra bags on hand is usually a good idea!

What do I need to install concrete spurs?

  • Concrete spurs
  • Trowel
  • Gloves
  • Protective gear
  • Concrete bags
  • Concrete fence posts

What are concrete spurs?

Concrete Repair Spur may be used to fix fence posts that have been damaged or rotted, or to fasten posts or wood frame work above ground. Reinforce or repair posts using concrete spurs.

In the case of fence posts that have been damaged or rotted, concrete repair spurs may be utilized to re-bolt the posts or wood frame work to the ground. Concrete repair spurs may be used to repair or strengthen posts. 

Those who wear concrete spurs aren’t cowboys at all. If you have a run of feather edge fencing with rotten posts, coach bolts are the cheapest and most effective way to keep the fence in place.

The wooden posts are supported by the Supreme Concrete Spurs, which come in two sizes. Simply dig a hole next to the broken or leaning post, screw the spur to it, support it up, and fill it with a bag of post fixer. 

In order to support fence panels, the Supreme concrete repair spur may be used to shore up or repair a damaged fence. Wooden fence posts with rotting bases may be repaired using this tool.

If the remainder of the post is OK, and the complete fence does not need to be replaced, this product is excellent. If necessary, it may be fastened to the existing post with bolts. The new posts are only 10-15 pounds each, so it’s best to replace them mate. 

They’re in a cowboy lol, and they’re used to reinforce the fence once more, not to repair it. Using a repair spur instead of a complete fence replacement is a viable option, and it may even be utilized on new fences provided wooden posts are used.

How to repair concrete fence posts with concrete spurs?

  • With a concrete repair spur, you may strengthen a fence post from one side of the fence, rather than having to replace the whole post. 
  • The first step is to remove the area around the unstable fence post so that you can get to the rest of the property (this could mean clearing away bushes or other plants).
  • Begin excavating around the fence post to make room for the post. In order to support the fence post flush, dig a hole half as deep as the spur you want to use. The concrete will need to be chipped away if it’s in there. 
  • Tips: Apply a coat of wood treatment to the freshly exposed post to extend its life.
  • Using a spirit level, verify that the fence post is straight up and down. Once you’ve drilled the proper holes in your post, you’ll need to hold the spur in place next to it while you drill the first coach screw into its top. 
  • For maximum stability, this will be inserted into both the fence post and the spur. After rechecking that it’s straight, drill in the additional screws while keeping it stable.
  • Before filling the hole with post mix concrete or post foam, make sure the spur and post are straight (you can read more about using post mix concrete here, or post foam here). In addition to being a fast and easy task, it also sets rapidly. 
  • If you want to cover it with plants or other leaves, you may do so after it’s placed in place. In cases when a wooden post’s bottom has rotted away, concrete posts may be used to rebuild the complete fence.

How to repair concrete posts with concrete spurs?

  • It’s best to dig a 2-foot-deep hole on one side of your fence post where the spur will be placed. Restore the integrity of a rotten post by carefully removing decayed wood from the post. Apply a preservative to any raw wood.
  • Decide on a location for the spur. Drive some props into the ground and use some spare timber to brace the fence post in the proper position. Post levels can be used after you’ve made sure that your posts are in the correct position.
  • You can either twist or bang a hammer on the concrete post to mark where the screws hit, depending on which method works best for your application. Remove the spur and drill where the screws are.
  • Using a spanner, screw the screws back into the spur and into the wooden post.
  • Using the manufacturer’s instructions, mix up a bag of post-fix and fill in the hole. Rather than collecting around the post, create a slight slope with your concrete mix to ensure that rainwater drains away from it.
  • Once the concrete has hardened, remove the sandbags and other supporting structures.

Conclusion

Concrete repair spurs may be used to fix fence posts that have been damaged or rotted, or to fasten posts or wood frame work above ground. Reinforce or repair posts using concrete spurs.

In the case of fence posts that have been damaged or rotted, concrete repair spurs may be utilized to re-bolt the posts or wood frame work to the ground. Concrete repair spurs may be used to repair or strengthen posts. 

Those who wear concrete spurs aren’t cowboys at all. If you have a run of feather edge fencing with rotten posts, coach bolts are the cheapest and most effective way to keep the fence in place.

The wooden posts are supported by the Supreme Concrete Spurs, which come in two sizes. Simply dig a hole next to the broken or leaning post, screw the spur to it, support it up, and fill it with a bag of post fixer. 

Frequently asked questions (FAQS): How to install concrete spurs?

How to install concrete spurs?

Prepare the spur by digging a hole. To begin, clear some room for the new spur. Dig a hole that is half the depth of your chosen repair spur and place it directly next to the fence post in need of support. 

To ensure that your concrete repair spur is flush with the wooden post, you may need to chip away part of the old concrete from the area around the wooden fence post. 

It’s a good idea to apply a coat or two of wood preservative to your fence and the freshly exposed post while you’re there. Make the necessary changes. In order to determine the height and distance between the drilling sites, you must first insert the spur into the new hole to ensure that it fits properly. 

What are concrete spurs?

Concrete repair spurs may be used to fix fence posts that have been damaged or rotted, or to fasten posts or wood frame work above ground. Reinforce or repair posts using concrete spurs.

In the case of fence posts that have been damaged or rotted, concrete repair spurs may be utilized to re-bolt the posts or wood frame work to the ground. Concrete repair spurs may be used to repair or strengthen posts. 

Those who wear concrete spurs aren’t cowboys at all. If you have a run of feather edge fencing with rotten posts, coach bolts are the cheapest and most effective way to keep the fence in place.

Bibliography

Are concrete spurs any useful? My Builder. Retrieved from: https://www.mybuilder.com/questions/v/5375/concrete-spurs-any-good

What was missing from this post which could have made it better?

Leave a Comment