How to fix a wooden post to a concrete post?

The article aims to answer the question “How to fix a wooden post to a concrete post”. It will also mention the tools you need to install the concrete posts. 

The article will also explain what concrete posts are. Read on to need more: 

How to fix a wooden post to a concrete post?

  • To remove the fence panel’s side frame from the post, use a crowbar. Do this until the nails that hold the two pieces together are revealed and easily accessed. 
  • Use a hacksaw to remove the old nails. Use a claw hammer or combination pliers to remove any protruding nails. 
  • Remove the fence panel after doing the same procedure on the other end of the fence panel. To remove a wooden fence post, use the steps in the preceding paragraphs to separate the fence panels on each side of the post.
  • Remove any concrete from the base of the fence post using a shovel. While you’re fixing the post, place lengths of wood on each side of the fence to act as a support.
  • In order to install the concrete repair spur, dig a hole around the post’s base using a shovel. Aim for a depth of 45-60 cm while excavating the hole (the deeper the better). A panel saw and a wood preservative are all that’s needed to remove the bad wood from the post. 
  • A concrete spur post should be inserted into the hole in order to protect the remnants of the post. Make wooden supports out of lengths of lumber to support the wooden post.
  • For these props, cut two 19 x 38 millimeter (mm) wood lengths and attach them together in either a ‘L’ or ‘T’ form, depending on your preference. Using a panel saw, pierce the end of the prop with a small nail. Repetition is essential.
  • Temporarily screw the post into the ground-driven props using a club hammer. A spirit level may be used to ensure that the fence post is absolutely upright before installation begins.
  • Using a hammer, pound the coach bolts into the concrete spur to designate the fence post. To remove the spur, use a power drill to drill holes through the post at the designated locations, taking care to maintain the drill level while in use.
  • Push the coach bolts through the spur and the post such that the tails are visible on the post side after reinstalling the spurs.
  • To fasten the nuts, use a spanner. Using the manufacturer’s directions, mix and fill the post hole to the manufacturer’s specifications.
  • Using a trowel, smooth out the concrete’s top so that rainfall runs off and away from the wooden post. Props should be left in place until after the concrete has hardened off.

What tools do I need to fix a wooden post to a concrete post?

  • Concrete
  • Spanner 
  • Timber
  • Crowbar
  • Wooden posts
  • Gloves 
  • Wheelbarrow
  • Hammer
  • Nails
  • Shovel 
  • Fast setting concrete
  • Concrete posts
  • Hole digger
  • Power auger 

Are concrete posts better than wooden posts?

Yes, concrete posts are better than wooden posts, but there are cons of concrete posts too. Read on to know:

As a hardy substance that is impervious to decay and insect assault, concrete is a long-lasting construction medium. Many people choose concrete over wood as a fence post material because it does not degrade and is impervious to decay or insect assault.

Mold and rot can’t readily permeate concrete, which means that anything that attempts to get through will likely simply sit on the surface of the concrete rather than causing any damage. This is why concrete is so easy to keep clean and in good repair.

Withstanding severe wind speeds in open-air gardens, concrete poles have been observed to survive. This is especially true in coastal settings, where ocean spray may be close.

Concrete posts are often more costly than wooden ones. 

Installing a concrete fence post may be a labor-intensive process that requires a team of two or more persons due to the weight and difficulty of the material. Contrary to popular belief, wood posts are impervious to damage, unlike concrete ones. 

A minor fracture or chip in the concrete might allow water to seep into the post, causing it to weaken. The metal reinforcing wires in the post may corrode if water in the post freezes. This might aggravate the fracture over time. 

What is a concrete post?

Concrete Slotted fence posts have four internal steel reinforcing bars, making them a long-lasting alternative to timber posts. 

You can rely on the long-term durability of our concrete fencing posts, which are resistant to ground decay. Fence posts with a slotted design can accommodate all of our fencing panels.

Backbone of a robust and appealing garden fencing is the use of concrete fence posts. Concrete posts are the way to go if you want your fence to be more stable in the rainy season. 

If you’re merely seeking to beef up your existing posts, our concrete spurs are a good option. Concrete spurs are short concrete posts that can be bolted to your existing posts for further support. 

To put it another way, if you enjoy the aesthetic of the wooden posts, you may do your part to keep them sturdy.

How to install concrete posts?

  • Rather than using wood supports, concrete slotted posts for fencing or regular trellis panels provide a long-lasting and simple solution to this problem. If necessary, the trellis or panels can be removed and replaced.
  • For added security, you can install panel security brackets to keep the panels from being lifted out.
  • Each post has a weathered (Pyramid) top that is four-sided.
  • Slotted posts and fence panels work well with concrete gravel boards because they keep the bottom of the fence panel off the ground and prevent it from deteriorating prematurely.
  • If the fence will be installed on a slope, you will need to have the posts lengthened to allow the panels to step down it.
  • There are two common methods for anchoring concrete posts: a dry mix (approximately 7 to 1 with no additional water added) or a post mix (about 7 to 1 with no further water added) (follow directions on the bag).
  • The size and depth of the hole will determine how much of each is needed. To ensure a snug fit around the post, aim for a hole diameter of 200 to 250mm (8′′ to 10′′). 
  • The hole should be at least 600 mm (2 feet) deep, regardless of the fence’s height. 
  • We recommend utilizing a longer post and increasing the hole depth to a minimum of 750mm (2′ 6′′) for fences exceeding 1.5m in height.

Conclusion

Pouring concrete posts into the holes you’ve dug for your fence posts helps keep them secure and protected while you continue with the construction of your fence. 

All that is left to do is mix your cement and wait for it to harden. Posts that will endure a long time may be put into the ground in only one day. 

Frequently asked questions (FAQS): How to fix a wooden post to a concrete post?

How to fix a wooden post to a concrete post?

To remove the fence panel’s side frame from the post, use a crowbar. Do this until the nails that hold the two pieces together are revealed and easily accessed. 

Use a hacksaw to remove the old nails. Use a claw hammer or combination pliers to remove any protruding nails.  Remove the fence panel after doing the same procedure on the other end of the fence panel. 

To remove a wooden fence post, use the steps in the preceding paragraphs to separate the fence panels on each side of the post. Remove any concrete from the base of the fence post using a shovel. 

How to concrete posts into the ground?

Before you start digging, make sure to check your yard for utility lines. For example, many yards include underground utility wires for electrical or plumbing purposes. You should check with your local utility providers at least two days in advance of excavating your post to determine if there are any wires flowing under the ground.

Make your hole three times the width of the post. Measure the length of your pole using a tape measure. 

Mark the ground where your post will go once you’ve taken the measurements. Before you start pouring cement, make sure you have enough area to dig a hole three times the diameter of the fence post.

What is a concrete fence post?

Concrete Slotted fence posts have four internal steel reinforcing bars, making them a long-lasting alternative to timber posts. 

You can rely on the long-term durability of our concrete fencing posts, which are resistant to ground decay. Fence posts with a slotted design can accommodate all of our fencing panels.

Backbone of a robust and appealing garden fencing is the use of concrete fence posts. Concrete posts are the way to go if you want your fence to be more stable in the rainy season. 

Bibliography 

Extending Concrete Fence Posts to Add Trellis. Retrieved from: https://community.screwfix.com/threads/extending-concrete-fence-posts-to-add-trellis.208173/

How to repair a wooden fence. B&Q. Retrieved from: https://www.diy.com/ideas-advice/how-to-repair-a-wooden-fence/CC_npci_100124.art

What was missing from this post which could have made it better?

Leave a Comment