Can there be concrete behind the drywall?

The article aims to answer the question “can there be concrete behind the drywall?”. It will also cover what drywall is and how you can repair it yourself. 

Can there be concrete behind the drywall?

Using a stud finder is a fast and straightforward way to locate studs that are concealed beneath the drywall.” It is as simple as turning on your smartphone and dragging it horizontally till a stud is shown on the screen to locate one.

Knock on the wall if there is no drywall. If the wall feels like concrete, it most likely is. Make a hidden hole in the drywall by using a tiny drill bit and a drill. The wall is concrete if the bit stops moving after a few inches.

What is a drywall?

Drywall construction is a kind of design in which the inner wall is put in a dry state without using mortar. It compares with the usage of plaster that dries following application.

Asbestos-cement boards, plywood, gypsum boards, and fiber-and-pulp boards are some elements that go into drywall production. The huge, stiff sheets are secured directly to the frame of the structure with nails, screws, or adhesives or are fixed on furring.

Specialized equipment for hanging drywall includes a drywall hammer and the junction tool, which is comparable to a plastering trowel but constructed of flexible steel with a concave bow.

Feathering out the outside edges of a plaster-like compound in joint spaces between wallboards is common for this tool, which is used to apply and smooth the compound. Nailheads, slightly depressed or “dimpled” by the hammer, vanish when similarly handled.

Drywall construction is utilized to reduce delays since the inside walls do not have to cure before additional work can be done and acquire certain finishes. Unfinished and finished wallboard are two types of wallboard that may be made.

Finished wallboards are faced with vinyl or other materials in a range of permanent colors and textures so that they need not be painted when fitted. Backing materials and the composition of the panel foundation influence the degree of insulation, fire resistance, and vapor barrier.

drywalls are fire-rated from 1 hour to 4 hours according to the period that the drywall would delay a fire’s progress.

How can I know if there is wood behind walls?

You can use a tape to see if there is wood behind the wall. A suitable starting point is 16 inches away from a wall. Using a tape measure, mark the corners at 12 inches, 16 inches, and 24 inches.

Tap the wall at a different distance for each distance. When you touch a stud-supported area of the wall, you’ll hear a distinct sound. Whether you have plaster walls, how can you determine if they’ve been painted or not?

To determine the sturdiness of the wall, insert a thumbtack or pin into a hidden spot on the surface. Because it’s softer and won’t crack, drywall is a better choice for a wall. Plaster is a lot more difficult.

Plaster walls aren’t going to be able to handle the pin, and they’re going to splinter as a result.

Can I hang a drywall on a cement wall?

Yes, you can hang a drywall on cement. There is nothing more straightforward than attaching drywall to the studs in a completely barren room. To hang drywall over paneling, you must ensure that you strike the wall studs before you begin.

However, an outside wall provides another avenue for creative expression. The hat channel is needed when you’re attaching drywall to cinder block or cement walls, and it’s so named because it looks like a beanie from the side.

Installing drywall on concrete walls is as simple as following these instructions:

  • Using concrete nails and a concrete-nail gun, connect the hat channels to the wall following the drawing of a plumb line to ensure that the hat channels are appropriately spaced for the drywall and insulation you’re using.
  • Each hat channel should have three concrete nails inserted into it at regular intervals.
  • Make sure you wear eye and ear protection while using a gas-powered nail gun or other equipment that uses a gas cartridge and a battery.
  • The next steps are to add false top and sole plates, lower the top for a drop ceiling if necessary, and frame around any plumbing.
  • Insulate the hat passages using the stiff board. It won’t do much to insulate, but it will reflect some heat into the room. Glue on the insulation with a thick zigzag bead of heavy-duty adhesive. Attempt to avoid any electrical or plumbing issues.
  • Starting at the ceiling, work your way down the walls, attaching the drywall as you go. The drywall should be marked with plumb lines that match the hat channels below. Hold the drywall in place with an electric screw gun and ask someone to assist.
  • Tape and mud the wall from here, or hire a professional to complete it for you. Alternatively, finish the wall yourself.
  • When it comes to finishing walls and ceilings, drywall is by far the most popular. Ground-up gypsum (calcium sulfate) is pressed between sheets of paper at a facility to make it. It is possible to buy drywall in various thicknesses up to 5/8 inch.
  • For the most part, it is available in lengths of 4, 8, and 12. In addition, the 5/8-inch thickness is more soundproof than the thinner sheets.

What materials would I need to hang drywall on concrete?

Can a drywall get cracks?

Yes, the drywall can get cracky. Observe the walls in your own home for a moment. There’s a good chance they’re constructed of drywall or wallboard. The good news is that it can be remedied quickly and.

Weather causes a home to expand and shrink. Framing may expand or contract, leading to drywall cracks as a result. However, depending on where the fractures are, mending them might be a straightforward task.

If it emerges on a level surface, you may use a pre-mixed joint compound or spackle to fill up the crack. The application of spackle and joint compound may also be used to crack on the border of a wall or in the corner of a room.

Even at strange angles, it will hold and dry. If cracks occur where the ceiling meets the wall, use caulk to fill them. A little degree of settling may be tolerated by caulk since it is so pliable.

After repairing the fracture, sand, prime, and paint the wall. When the weather changes again, prepare for another wave of drywall cracks.  

Can I  repair the drywall myself?

  • Use a Carpenter’s Square to outline the damaged area.
  • A utility knife or keyhole saw may be used for this step.
  • The next step is to cut and install the support in the wall.
  • Cut the Drywall Patch to the Right Size.
  • Screw the Drywall Patch in place using Drywall Screws in the fifth step.
  • Finish the Drywall Patching.

When did drywall start being used?

In 1916, drywall was created. As a cheaper alternative to plaster walls, the United States Gypsum Corporation, which had amalgamated 30 distinct gypsum and plaster production businesses 14 years earlier, developed it to protect dwellings from urban fires.

Plaster was used in constructing interiors before drywall became popular. It’s been around for millennia. According to archaeological evidence, as early as 3,700 B.C., Egyptians utilized plaster and gypsum blocks on woven straw lath to create the pyramid of Cheops.

Conclusion

You may use an electronic stud finder to locate studs, or you can attempt to locate them yourself. A stud finder can detect studs fast and precisely if you have drywall walls.. Metal scanning may help detect the nails that hold the lath to the studs, although it is less successful on lath/plaster walls.

With Stud Detector, Android users can identify metal framing with ease because to the app’s excellent stud finding capabilities. It’s a free software for Android that mimics the functionality of a compass and magnetic field. Additionally, it may be used to measure the magnetic field of an Android phone.

Frequently asked questions (FAQS): how do I know there is concrete behind my drywall?

How do you mount concrete behind drywall?

There’s no use in attaching it to drywall. Concrete-specific anchors are available. They expand into the hole bored in concrete by means of a hammer drill, which is used to insert masonry bits. Sleeve anchors, commonly known as machine screws, are the most common kind of masonry anchor.

Can you put drywall directly on concrete?

Drywall should never be put directly to a concrete slab, and should be built atop a barrier wall to avoid any form of moisture transfer, which might produce mould and harm the drywall. Continue reading to find out how to lay drywall over concrete and the supplies you will need to perform this job.

What should I put between drywall and concrete?

The answer is coating concrete with a vapour barrier, which behaves like a resistant cell membrane instead. With a barrier in place, the drywall is protected. 

Typically, a stud wall is subsequently placed against the concrete, however furring strips are fast, simple and take up less area.

What is behind the drywall?

A gypsum-based material known as drywall is used to build most of the walls of a typical house. 

A half-inch thick sheet of drywall, also known as wallboard, is the most common thickness. It is attached to the wall studs using screws or nails.

Can drywall be attached directly to concrete? 

Yes, you may attach drywall to a concrete block wall using a drywall adhesive. 

Electric drills equipped with driver bits are often used to put 2-inch drywall screws into wall studs. For concrete block walls, it’s simple to apply drywall to the inside.

Can you hang a TV on drywall?

If there are no studs in the area where you wish to place the TV, you will need to use a hollow wall anchor like a toggle. 

If you know the limitations of the wall and the toggles, you can safely and securely mount a TV on drywall or plaster without connecting to a stud.

What is Blueboard?

Plaster baseboard is sometimes known as blue board drywall. Surface paper on blue boards offers exceptional absorption properties for veneer plastering. 

Veneer plastering requires fewer processes and has better water and mould resistance. For mud, taping, or painting, blue board drywall is not the best choice.

Is sheetrock the same as drywall?

Gypsum plaster is squeezed between two sheets of thick paper to form a panel known as drywall. It is utilised in the construction of internal walls and ceilings, as well as other structures. 

Traditional lath-and-plaster construction was replaced with drywall as a time-saving alternative. Sheetrock is a trademark of the US Gypsum business for drywall.

Can you hang a TV on drywall? 

A 100-pound TV may be supported by drywall, but the device is still fragile and the mount may need extra support, or the TV may fall to the ground. 

The wall studs that hold up your TV are what make up the frame of the TV. In order to keep both the TV and the mount in place, these anchors are essential.

Bibliography

Warnock, A. C. C. (1990). Sound transmission through very porous concrete blocks. The Journal of the Acoustical Society of America, 88(S1), S135-S135.

Do it yourself: Retrieved from: https://www.doityourself.com/forum/walls-ceilings/599134-mount-tv-cement-block-behind-drywall.html

Dolphan.  The garage journal. Retrieved from: https://www.garagejournal.com/forum/forums/general-garage-discussion.3/

Leave a Comment