Can lava melt concrete?

This article will answer the question “Can lava melt concrete?” and will also cover the concept of melting point and concrete’s inherent resistance to fire. 

This blog article will also cover explosive spalling, thermal cracking, and physical and chemical changes on concrete under fire.

Can lava melt concrete?

No, lava cannot melt concrete.

The melting point of concrete is about 1,500 °C (2,700 °F). There are just 871°C (1600°F) of the most intensely orange magma. Even if it didn’t melt, it doesn’t necessarily guarantee that it could be used.

At what temperature does concrete melt?

Concrete starts melting at around 1550 degrees celsius. It’s not possible to melt typical concrete. It breaks down (usually before any ingredient melts). 

In any event, the melting point of materials comprising more than one constituent is not a single value. It will, however, turn into a glassy mess at temperatures of (perhaps) 900 degrees Celsius if heated with a flux such as iron oxide.

Because concrete is composed of sand and gravel with Portland cement, it does not melt, but rather decomposes into a variety of components. Concrete decomposes at a temperature of thousands of degrees Fahrenheit. Concrete softens and crumbles when heated.

Heat-induced spalling has a straightforward process. Concrete’s moisture converts to steam when heated above 212 degrees Fahrenheit, the boiling point of water.

What is the melting point for concrete?

About 1500 degrees Celsius is the melting point of a typical melting point of concrete. Cement, limestone, quartz, or any other rock sample that can sustain such strength are among the many constituents, and they all affect the melting point of concrete

As a result, the estimate is a little shaky. Moisture in the concrete matrix and the particles generated during construction might affect its melting point.

What does Melting Point mean?

Melting point refers to the point at which a solid changes state from solid to liquid. The source of the heat might either be natural or artificial. Molecules in a solid seem dense and well-organized under a microscope.

Particles in the concrete move wider apart when there is heat (thermal energy). You achieve a liquid condition when the distance expands, and the arrangement becomes twisted and unpredictable. It will take longer to make cement since the temperature required is so high.

Since ice is cheap and can be heated to water, the best-case scenario for transitioning from solid to liquid is water. When it comes to concrete, the varying melting points of the constituents are important to consider.

As the melting point of a concrete sample is affected, we may infer that contaminants have a similar impact. The melting point of quartz alone is 1650 degrees Celsius, whereas the melting point of limestone is 2572 degrees Celsius.

Cement melts at a temperature of around 1550 degrees Fahrenheit. When it comes to achieving such temperatures, cement falls to roughly 1500 degrees because of the many impurities it contains. A substance’s melting point is lowered when it contains impurities, as we know from scientific research.

What physical and chemical changes happen to concrete at high temperatures?

The physical and chemical properties of concrete are affected at high temperatures. It may melt at a lower temperature than the cement’s constituents. When heated to a high temperature, the concrete melts in a complicated interaction with fire. That’s because it’s made up of a variety of different components.

Temperature fluctuations may have both permanent and reversible effects on its overall function. Let’s take a closer look at it. During building, concrete is made of a variety of materials that are combined with water.

Water molecules can escape the concrete when it reaches a temperature of about 100 degrees Celsius. The boiling point of water may jump to 140 degrees Celsius because of the pressure of the concrete. As the water evaporates, more molecules are released into the atmosphere, increasing pressure.

Cracking occurs when the pressure exceeds the concrete’s compactness. Hydrated concrete also contains calcium hydroxide. The compound dehydrates at roughly 400 degrees Celsius, resulting in a higher pressure level in the concrete.

Aggregates are created throughout the manufacturing process due to a mix-up. The quartz-derived chemicals transform 575 degrees Celsius, which causes the general enlargement of the object being worked on. The ones made from the limestone mixture irrevocably disintegrate at about 800 degrees.

High temperatures damage the concrete’s structural integrity, and this causes it to collapse. However, it may happen in a variety of ways. Steel reinforcements, for example, may lose tensile strength, which weakens the concrete and makes it more vulnerable to earthquakes.

Does the high temperature affect the aggregates in concrete?

Yes, the elevated temperature affects the mixture’s aggregates. At 575 degrees Celsius, the minerals in quartz-based aggregates transform, increasing their volume. Limestone-based aggregates, on the other hand, disintegrate permanently at 800 degrees Celsius.

Concrete structures may collapse in a variety of ways as a consequence of being exposed to high temperatures. Too much heat energy may weaken steel reinforcements in reinforced slabs, resulting in the structure’s demise as a result. High temperatures may degrade the cement paste-reinforcement link, resulting in loose connections between the matrix’s various components.

Is concrete resistant to fire?

Yes. The fire resistance of concrete is well-known. The capacity of a material to perform at a high temperature is often referred to as fire resistance. Additionally, it protects from the impacts of fire. Adding chemicals or admixtures boosts the material’s performance in high-temperature conditions.

Several things influence concrete’s ability to withstand fire. Moisture, the quality of the aggregates, and the region exposed to high temperatures all have a role.

Defining fire resistance characteristics include the material’s ability to withstand and defend itself from fire and its ability to continue to operate normally even when subjected to very high temperatures. 

Additives or chemicals that work in concert with concrete’s natural fire resistance make it even more fire-resistant. According to studies, the quality of the aggregates used in the mixture, the amount of moisture present in the matrix, and the size of the concrete surface all have a role in how well concrete performs when subjected to high temperatures.

What is meant by spalling concrete?

Spalling is thought to be caused by a buildup of pressure inside the matrix. When exposed to fire, the water in the matrix swiftly converts into highly-energized steam that is constantly finding its way out of the building. 

In a fire, the rapid rise in temperature causes spalling when the concrete matrix separates from the rest of the structure. Aggregate spalling, corner spalling, surface spalling, and explosion spalling are all types of spalling. 

Corner spalling occurs only after the whole structure has been compromised by the aggregate, surface, and explosion damage in the first half an hour of exposure to a very high temperature, and only then does it occur. After about one and a half hours of exposure to heat, concrete often begins to spall in the corners.

Both surface and explosive spalling create loud popping sounds, but aggregate spalling produces only modest popping noises. Among all the types of spalling, explosive spalling is the most harmful and dangerous to a building’s structure and nearby properties.

As a consequence of the increasing pressure, the structure’s maximum strength is exceeded, and the only option is for the structure to explode in multiple large chunks.

What are the spalling forms of concrete?

Spalling is a term used to describe concrete that has been exposed to very high temperatures in a short period. Spalling may occur in a variety of ways, including:

During the first half-hour of exposure to high temperatures, concrete is vulnerable to all kinds of spalling except for the corner type. The corner spalling occurs when the structure weakens owing to the surface, explosive, and aggregate spalling. 

Extreme fire exposure takes around an hour and a half to complete. Popping noises may be heard in the aggregate form before surface and explosive spalling, although these noises are not harmful. There are massive explosions and massive damages at this time.

Spalling is caused by the buildup of pressure in the matrix. High temperatures cause water in concrete to turn into steam that is constantly searching for a path out of the concrete. Over time, the pressure increases to a point where the concrete no longer contains it.

When the concrete breaks down, there are explosions.


We already know that concrete is a difficult substance to melt since it is a mixture of different materials. Heat is affected by various factors when it transitions from a solid state to a liquid one.

The melting points of the various components are different, and the aggregates created may begin to melt before the concrete begins to melt. So it isn’t easy to ascertain what the melting point of concrete is.

In addition, the composition of concrete samples exposed to fire may vary based on the materials available at the time of the making. You should now know all you need to know about concrete and its melting process.

Frequently asked questions (FAQS): Can lava melt concrete?

Can lava melt concrete?

No, lava cannot melt concrete.

The melting point of concrete is about 1,500 °C (2,700 °F). There are just 871°C (1600°F) of the most intensely orange magma. Even if it didn’t melt, it doesn’t necessarily guarantee that it could be used.

Does concrete melt?

Yes, concrete does melt.

Thermal degradation (dehydration, baking, sintering, melting) occurs when concrete is heated over 1300°C. When cooled to room temperature, the brownish melt hardens into a glassy product (ceramic).

Is concrete able to sustain any kind of temperature?

65-93°C (150-200°F) is the temperature at which concrete begins to degrade. So, to guarantee predictable concrete behavior, existing codes and industry standards for reinforced concrete buildings define a maximum temperature restriction of 65-93oC (15O-2oo°F).

What happens to concrete if it is exposed to heat or flames?

Melting typical concrete is not possible. It breaks down (usually before anyone’s ingredient melts). There is no single melting point for materials having more than one component. But if you heat it to 900 degrees Celsius and add iron oxide, a glassy mess is likely to be formed.

What is the boiling point of concrete?

212 degrees Fahrenheit is the boiling point temperature for concrete. At 212 degrees Fahrenheit, or the boiling point of water, the moisture in concrete evaporates. Pressures build up in the concrete matrix as the temperature increases faster than the steam can escape through the matrix. This causes the concrete to spall.

Is fire a threat to concrete?

Yes. Damage to the concrete and steel reinforcing bars may occur in the footings, slabs, and footing stem walls in the event of a significant fire. Fires often destroy or severely damage concrete-encased plumbing and electrical conduit. 

Does melting concrete exist?

An “iron lance” may be used to melt concrete by burning iron rods with oxygen to generate adequate heat. An iron rod or wire is held in an iron cylinder, and oxygen is pushed through it. Using an acetylene torch, the iron may be combusted at the open end.

If the temperature rises over a certain point, will concrete explode?

Yes. Concrete may truly explode when heated to very high temperatures. When a fire breaks out near a concrete building, the explosions may have a huge impact, but experts don’t fully understand how they occur.

How to make concrete fireproof?

Fireproofing concrete is a complicated process. To make a 3:2:2:0.5 mixture, divide the gravel, sand, refractory cement, and hydrated lime into three equal portions. Regardless of the amount of fireproof concrete you want to produce, use this ratio.

Is steel more flammable than concrete?

Yes, Steel is more flammable than concrete. As one of the most frequent construction materials, concrete also happens to be one of the most fire-resistant options. 

Fire-resistant steel is typically reinforced and protected from fire by the use of aluminum, which is substantially more fire-resistant than steel. Although concrete is a great building material, it must be noted that not all concrete is equal.


Ready to mix concrete. How Do You Make Concrete Fire Resistant?. Retrieved from: